wpeE.jpg (10474 bytes)

Log Grapples Log Loader Rotators Adding Grapples to Backhoes and Excavators Home

 

Northeast Implement Corporate Home Page

Log Grapples

Log Loader Rotators

Excavator Rotators

Clamshell Buckets

Rotator Hook

Waste Material Grab

Stone Grapples

Grapples for excavators

Half Hangers

How to add grapples to backhoes, excavators, boom trucks and grapple trucks.

Example of grapple used on mini-excavator, and Gradall Loader

HOME         

 

Hangers

It is necessary to install a hanger between the rotator and the lifting boom.  The hanger enables the grapple to swing in two directions which reduces stress.

wpe1D6.jpg (20226 bytes)

A half hanger is available for the R45 and R30 rotators.  The half hanger has the part that connects to the rotator, including the pin.  Click here for more information on half hangers.

Hanger Model

For Rotator Model

 Rotator Opening (mm) Rotator Pin diam. Rotator to Hanger Pin Part # Boom End Width Boom Pin Diameter Loader End Pin #
32844623 FR10 , GV4  R45 , IVR4 59 75 mm 25 mm 52062270   61 ½ mm. 20 mm 52062262
33280025 FR07 , GV3 , R3, IVR3 59 62 mm 25 mm 43280445   75 mm 25 mm 43280445
23391709 FR1, IVR 4.59 , R45 , GV4 75 mm 25 mm 43280445   75 mm 35 mm 43391713
Palfinger 1

R45 , GV4

 76 mm 25 mm 71 mm 30 mm

A hanger enables the grapple to swing two ways.  Below is an example of a hanger.  The top end of the hanger is fastened to the loader's boom, and the bottom to the rotator. 

  hanger3g1.jpg (15975 bytes)

 

Northeast Implement, 460 Halsey Valley Road, Spencer, NY 14883.  Telephone: (607) 589-6160.