Northeast Implement Corporate Home Page

Log Grapples

Log Loader Rotators

Excavator Rotators

Clamshell Buckets

Rotator Hook

Waste Material Grab

Stone Grapples

Grapples for excavators

Half Hangers

How to add grapples to backhoes, excavators, boom trucks and grapple trucks.

Example of grapple used on mini-excavator, and Gradall Loader        

Valby STG36 Stone Grapple

The Valby STG36 is a Grapple used for applications in which a tip-to-tip pinching function is needed, rather than a bypass function.  The maximum opening of the STG36 is 36".

• Hardox is a prime steel used in the manufacture of high quality log grapples.
• All Valby grapples have a bronze bushing at every joint, and every joint has a grease fitting.
• Large, powerful cylinder.
• Double connection rods provide good balance and less stress.
• Modern bypass grapple design

Above: The STG36 in a closed position, with the jaws together.

Above: the mounting plate for the STG36.   A R45 rotator can be used for in conjunction with this grapple.

Above (two photos).  The STG36 has grease fittings at each joint.

The jaw material is thick (meter reads .6 inches).

Northeast Implement, 460 Halsey Valley Road, Spencer, NY 14883.  Telephone: (607) 589-6160.