|
Northeast
Implement Corporate Home Page
Log Grapples
Log Loader Rotators
Excavator Rotators
Clamshell Buckets
Rotator Hook
Waste Material Grab
Stone Grapples
Grapples for excavators
Half Hangers
How to add grapples to backhoes,
excavators, boom trucks and grapple trucks.
Example of grapple used on
mini-excavator, and Gradall Loader
HOME
| |
 |
The Valby GR50HD is suitable for use on smaller
truck loaders. We recommend the R45 rotator with this grapple. Prices:
Grapple: $2600
Rotator: $900
Grapple & Rotator combination, including hoses, fittings
and intermediary plate: $3810 |
| |
GR50HD |
| Max. gripping width |
50 ¾" |
| Min. opening |
3 ½" |
| Max. lifting capacity |
3740 lbs |
| Height. open |
26 ¼" |
| Height. closed |
20" |
| Width of wider claw |
12 ¼" |
| Working pressure |
2900 psi |
| Jaw material |
Hardox |
| Weight |
246 lb. |
| Recommended Rotator: |
R45 |
- Modern bypass grapple design.
- Hardox is a prime steel used in the manufacture of high
quality log grapples.
- All Valby grapples have a bronze
bushing at every joint, and every joint has a grease fitting.
- Large, powerful cylinder.
- Double connection rods provide good balance and less stress.
- A belly plate protects the
cylinder from underneath.
- The Valby bypass grapples have excellent geometry. The form
of the claws enables a smooth roll in of the stems. The grapples also close to a tight
minimum opening.
 |
The jaws are made out of Hardox, a prime steel
for grapples. The jaws are almost 5/8" thick. The grease fittings are protected
in exposed areas. |
|
|
 |
The jaws open up to 50 3/4". The
area inside the jaws when closed to where they meet is: 2.37 sq. ft. |
|
