|
Northeast
Implement Corporate Home Page
Log Grapples
Log Loader Rotators
Excavator Rotators
Clamshell Buckets
Rotator Hook
Waste Material Grab
Stone Grapples
Grapples for excavators
Half Hangers
How to add grapples to backhoes,
excavators, boom trucks and grapple trucks.
Example of grapple used on
mini-excavator, and Gradall Loader
| |
R12 Rotator
The rotator comes with JIC fittings for the
incoming oil. The oil hoses between the grapple and the rotator can be hooked up
either from the bottom of the rotator, or from the sides of the rotator.
| Model |
R12/R12S |
| Rotation |
Unlimited in Either
Direction |
| Max. Load |
26,455 lb. |
| Max. Working Pressure |
3626 PSI |
| Torque |
1770 ft. lbs./ 2900
PSI |
| Weight: |
143 lbs. |
| Has pin to fit grapple hanger with
hole of: |
1 3/8"/1
3/4" |
| Has same hook up dimensions as: |
Indexator
GV12 , MTR104 |
| Oil hoses to grapple from: |
Bottom or Sides of
rotator. |
| Inside bracket diameter: |
3.189" (136 mm) |
| On the R12, the upper bracket has holes for
35mm or 1 3/8". The R12S has holes for 45mm or 1 3/4" pin. |
|
ROTATORS
WITH FLANGES
|
|
| The distance
across the bolt holes is 6 13/16”. The
bolt diameter is 5/8”, or 16mm. |
| Type |
A) Inside width of
the bracket |
B) Pinhole
diameter through rotator. |
C) Distance
across, between bolt holes |
E) |
Thread: |
| R 12 |
3.189” (81
mm) |
1.378” (35
mm) |
6.8” (173 mm) |
11.968” (304
mm) |
JIC ¾” 16 |
| R 12S |
3.956" (101
mm) |
1.75" (45 mm) |
6.8" (173mm) |
15.827" (402
mm) |
JIC ¾” 16 |
|
