|
Northeast
Implement Corporate Home Page
Log Grapples
Log Loader Rotators
Excavator Rotators
Clamshell Buckets
Rotator Hook
Waste Material Grab
Stone Grapples
Grapples for excavators
Half Hangers
How to add grapples to backhoes,
excavators, boom trucks and grapple trucks.
Example of grapple used on
mini-excavator, and Gradall Loader
HOME
| |
R 30 |
 |
Rotation: |
Unlimited in either
direction |
| Max. load |
6600 lb. |
| Max working pressure |
3000 psi |
| Torque |
516 ft. lb./2320 psi |
| Weight: |
41 lb. |
| Has pin to fit grapple hanger with
hole of: |
1" |
Price $760
 |
The R30 is a continuous rotation rotator where
the oil to open and close the grapple is run through the rotator to the outlets on the
axle. The rotator has a grease fitting for hookup pin of the hanger. The hose
guard protects the hoses from damage. |
-The hook up dimensions of the R30 allow it to replace GV3
and FR7, as they are the same.
 |
| The rotators come with JIC fittings.
Hook up is easy, as symbols on the rotator describe the functions of each
outlet. From left to right: opening of jaws, rotating functions, and closing
of the jaws. |
ROTATORS
WITH AXLES
Hook up
Dimensions in inches. Measurements in
parentheses are in millimeters.
| Type |
A) Width of block
on top of the rotator |
B) Pinhole
diameter through rotator |
C) Axle diameter |
D) Pinhole
diameter to fasten grapple to rotator |
E) |
Thread |
| R 30 |
2.362” (60 mm) |
0.984” (25
mm) |
1.948” (49.5
mm) |
0.984” (25
mm) |
9.37” (238
mm) |
JIC ¾” 16 |
|
