Northeast Implement Corporate Home Page

Log Grapples

Log Loader Rotators

Excavator Rotators

Clamshell Buckets

Rotator Hook

Waste Material Grab

Stone Grapples

Grapples for excavators

Half Hangers

How to add grapples to backhoes, excavators, boom trucks and grapple trucks.

Example of grapple used on mini-excavator, and Gradall Loader        

Valby TG12 UG/7 Waste Grapple

Universal grab for sorting and handling of recycling materials and for forestry applications. The TG12 UG/7 grapple has four jaws on one side and three on the other side. It is of the modern bypass design where the material is held in place by force from from several directions. The jaws are made of high grade Hardox steel. This size grapple is suited for use in mini excavators, skid steer loaders   and small knucklebooms.  The Valby grapples  can be used without a rotator, with a hanging rotator or with a rigid rotator.

The grapple has a flat mounting plate, so it can be used with either hanging or rigid rotators. All joints have a grease fitting and a bronze bearing.  The grapple comes with JIC fittings. (Not shown) The bypass design supports the load from underneath, which gives a more controlled release.

The form of the jaws enables the grapple to penetrate into piles of brush or other materials.	These type of grapples have many uses in the logging industry, they penetrate in piles of brush and can be used to feed wood chippers and tub grinders.

	Position	Measurement
	A	27 ½"
	B	13"
	C	23 ½ "
	D	1"
	E	10 ¾"

Northeast Implement, 460 Halsey Valley Road, Spencer, NY 14883.  Telephone: (607) 589-6160.