|
Northeast
Implement Corporate Home Page
Log Grapples
Log Loader Rotators
Excavator Rotators
Clamshell Buckets
Rotator Hook
Waste Material Grab
Stone Grapples
Grapples for excavators
Half Hangers
How to add grapples to backhoes,
excavators, boom trucks and grapple trucks.
Example of grapple used on
mini-excavator, and Gradall Loader
| |
Valby Grapples
 |
GR36 + R 30
The GR-36 Grapple is a small grapple for farm
tractor forwarders and 3-point hitch knuckleboom loaders. The grapple is shown here
with the R-30 rotator. This is also a popular combination when small backhoes are
converted to loaders. |
|
GR36 |
| Max. gripping width |
36" |
| Min. opening |
1 ½" |
| Max. lifting capacity |
4409 lb. |
| Height. open |
24 ½" |
| Height. closed |
16" |
| Width of wider claw |
11 ¼" |
| Working pressure |
2900 psi |
| Jaw material |
Raex 640 |
| Weight |
110 lb. |
| Recommended Rotator: |
R3 |
Click here for the grapples's motion
drawing.
 |
- Modern bypass grapple design.
- All Valby grapples have a bronze
bushing at every joint, and every joint has a grease fitting.
- Large, powerful cylinder.
- Double connection rods provide good balance and less stress.
- A belly plate protects the
cylinder from underneath.
- The Valby bypass grapples have excellent geometry. The form
of the claws enables a smooth roll in of the stems. The grapples also close to a tight
minimum opening.
|
|
All Valby grapples have
easily accessible grease fittings. Every joint has a bronze bushing, and there is a
grease fitting for every joint. |
|
